What DTF Supplies Do You Need to Print Transfers?

To print your own direct-to-film transfers, the three core consumables are DTF ink, DTF transfer film, and DTF adhesive powder. Each must suit your printer and production process. You also need the appropriate printing, curing, and heat-press equipment, plus garments or other substrates approved for that process.

This checklist focuses on choosing consumables. Texas DTF Supplies sells ink, film rolls, and powder, with shipping across the contiguous United States and local pickup in Houston.

Your DTF supplies checklist

  • Ink: the colors and quantities specified for your DTF printer's ink system.
  • Film: a roll with the correct actual width, feed requirements, and release instructions.
  • Adhesive powder: a product suitable for your ink, film, fabric, and curing workflow.
  • Equipment and workspace: a supported DTF printer, the required curing equipment and heat press, and ventilation and handling arrangements specified by equipment instructions and safety documentation.
  • Test materials: representative garments and enough consumables to validate the process before starting a customer order.

1. Choose DTF ink for your exact printer setup

Start with your printer model and the ink specification supplied by its manufacturer or service provider. A printhead brand alone does not establish compatibility. Check the intended ink chemistry, color configuration, and maintenance requirements before ordering.

Our DTF ink collection offers 1000 mL bottles in cyan, magenta, yellow, black, and white. Select each required color and quantity individually; a single bottle is not a five-color set.

If you are changing ink brands or formulations, ask your equipment provider for an approved transition procedure. Do not assume different inks can be mixed or that a generic cleaning method is appropriate for your machine.

2. Match film width to your printer's media specifications

Check both the maximum supported media width and the usable printable width. Film must feed correctly through the machine; printable width also determines how much room you have for artwork. Confirm any core, roll-diameter, and loading requirements in your printer documentation.

Our DTF film rolls are 100 meters long (approximately 328 feet), with these width options:

  • 13 inches: approximately 33 cm.
  • 14.5 inches: approximately 36.8 cm.
  • 60 cm: approximately 23.6 inches. This is not a full 24-inch roll.
  • 80 cm: approximately 31.5 inches. Check this actual width rather than assuming it is 30 inches.

Also confirm the film's coating orientation and peel instructions from its current product documentation. Read our DTF film roll width guide for a more detailed buying checklist.

3. Select adhesive powder and a practical bag size

Adhesive powder is part of the transfer process, but suitability depends on the complete combination of materials and settings. Check the powder's product information and safety documentation, then test it with your ink, film, and intended garment.

Our fine DTF adhesive powder is available in 1 kg and 5 kg bags. Choose a quantity based on your tested consumption, expected workload, and ability to store the material according to its instructions. A larger bag is useful only if its quantity and storage requirements fit your operation.

Use the current material and equipment instructions for application, curing, and pressing. There is no single temperature or time that this checklist can safely prescribe for every setup.

Check these details before placing your first order

  1. Record the printer model and approved ink specification. Confirm every color you need and the bottle quantity for each.
  2. Measure the required film width. Check media limits, printable area, roll loading, and the actual dimensions on the product page.
  3. Confirm material instructions. Review the ink, film, powder, garment, and equipment requirements together.
  4. Plan a small validation run. Record the materials, settings, peel behavior, and finished result so you can repeat your approved process.
  5. Allow time for testing and delivery. Order before your current stock runs out rather than relying on an unverified arrival date.

Frequently asked questions about DTF supplies

Are DTF supplies the same as ready-to-press transfers?

No. Ink, film, and powder are materials used to produce transfers with your own equipment. A ready-to-press transfer already has the printed design prepared for application. Texas DTF Supplies sells consumables; this store does not offer custom transfer printing.

Do I need to buy every ink color?

Order the colors required by your printer's configuration and your existing stock. Our ink bottles are sold by selected color. Check your equipment documentation instead of assuming every printer uses the same setup.

Can I choose film based on a nominal printer size?

Check the actual roll width against the printer's media specifications. For example, our 60 cm roll is approximately 23.6 inches wide, while our 80 cm roll is approximately 31.5 inches wide. Nominal size labels are not a substitute for that check.

Can I order outside Texas?

Yes. We ship across the contiguous United States through UPS. Available shipping options and charges appear at checkout; delivery depends on the destination and selected service. Houston customers can also choose local pickup. Contact us to confirm pickup details before traveling.

Build your consumables order

Start with DTF ink, select the correct film roll width, and add adhesive powder for your tested workflow. If a listing does not answer your question, contact Texas DTF Supplies with the product details and your printer model before purchasing.